The belt guide at the bottom of the cover, the reinforced, split back belt, the highly stable click buckle with integrated adjustment – these are the features of this work vest. They are crucial to ensure that the lifejacket can be safely adapted to a fall protection system. Both elements of the personal protective equipment complement one another and function reliably as a combined system. Especially in locations such as offshore wind farms or at rescue from heights the compact form of the lifejacket is important to ensure the necessary freedom of movement.
All fall arrest attachment points are fast and safe reachable. An integrated PLB is visible through an inspection window from the outside and is placed by the 3D buoyancy chamber in an emergency at the highest possible point in order to allow optimal radiation performance. The coated outer fabric of the protection cover is highly tear and abrasion resistant, making it suitable for hard labor.
Approvals
- CE-approved acc. to DIN EN ISO 12402-2 (CE-Sign)
- IMO Res. MSC 81(70) amended by MSC 200(80) and 207(81) (SOLAS).
cover:
Through the SECUMAR-window the function check is now easier than ever. Through a window in the cover, it is always seen from outside at a glance whether the inflator and the EPIRB are in ready to use condition. The donning and doffing is particularly easy by the patented click front-fitting. Around the vest as a jacket and close the front-fitting as with the seat belt. Even with gloves, this fitting is easy to use.
By additional belt guides, the lifejacket can be connected to a fall arrest and thereby don and off together.
- buoyancy chamber:
With the new patented 3D buoyancy chamber design an exceptional turning effect is achieved even with heavy clothing. In addition, the float in the inflated state is characterized by a very high level of comfort. By the three-dimensional design, the visibility of the wearer in the water increased significantly and allows the installation of a dedicated light at the highest point of the buoyancy chamber and approximately 20 cm higher than traditional life jackets. Also, the PLB gets a significantly improved range in this position - inflator:
1st Chamber: A red-green indicator for all four necessary conditions: SECUMAR Pill Box inserted, CO2 cartridge full, CO2 cartridge installed properly and locked trigger.
2nd Chamber: A red-green indicator for all necessary conditions: CO2 cartridge full, CO2 cartridge installed properly and locked trigger. - configuration:
A soft neck fleece ensures a comfortable fit in the neck. It is removable, washable and replaceable at any time.
The service tag on the waist belt shows you at a glance when your lifejacket should be serviced again in SECUMAR Service.
| Performance Class (ISO 12402) | 275 N |
| Method of Inflator | Automatic inflator 4001S and manual inflator 401S |
| Buoyancy | 290 N |
| CO₂-Cartridge | 60 g CO₂ Dock |
| Buoyancy bladder type | bright-orange-buoyancy-chamber-twin-chamber-membrane-technology-in-3d-design overpressure-valve |
| Standard equipment | In protective cover, neck fleece (detachable, washable), oral valve, whistle, pocket for nametag, belt guides for fall arrest system, lifejacket storage bag |
| Colour | Blue |
| Integral harness | No |
| Closure | Front click buckle |
| Crutch strap | Optional |
| Spray Hood | Yes |
| Emergency light | Yes |
| Integral pocket for ELT | EasyRescue |
| Inspection window | Yes |
| Lifting becket | Yes |
| Size / Bodyweight | over 50 kg |
| Buoyancy bladder | 3D |
| Buddy Line | Yes |
| Type of clothing | Heavy weather clothing |
| Type of buoyancy | Inflatable |
| Approval | CE, SOLAS |
| 3M® reflective strips | Yes |
| Back section | divisible back strap |
| Protective cover | Polyamide |
